CDZXS - 39-900000-195 SEAL-N-PLACE, PART A
- MSDS: CDZXS
- Manufacturer: SYON CORP
- Product Name: 39-900000-195 SEAL-N-PLACE, PART A
- National Stock Number: 8040-01-108-6660
Product Identification
Product ID:39-900000-195 SEAL-N-PLACE, PART A
MSDS Date:01/01/1995
FSC:8040
NIIN:01-108-6660
Kit Part:Y
MSDS Number: CDZXS
Responsible Party
ASHLAND, MA 01721
US
Emergency Phone: 800-255-3924
Info Phone: 800-255-3924
Cage: SYONC
Contractor
Telephone: 508-881-8852
Cage: SYONC
Ingredients
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: 0.001%
OSHA PEL 2 PPM
ACGIH TLV: 5 PPM
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:POSSIBLE IRRITATION & SENSITIZATION.
First Aid
First Aid:EYE: FLUSH W/WATER FOR >15 MINUTES. SKIN: REMOVE CONTAM
CLOTHES. WASH W/SOAP & WATER. INGEST: IF CONSCIOUS, GIVE WATER OR
MILK, INDUCE VOMIT. INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN &
ARTIFICIAL RESPI RATION IF NECESSARY.
Fire Fighting
Flash Point Method:TOC
Flash Point:200F,93C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING AND
RESPIRATOR. SCOOP UP EXCESS AND REMOVE. RESIDUAL CAN BE REMOVED
WITH NONFLAMMABLE SOLVENT.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL & MECHANICAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH-PROOF GOGGLES.
Other Protective Equipment:SAFETY SHOWERS AND EYE WASH FACILITIES.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.16
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE.
Appearance and Odor:GRAY LIQUID.
Percent Volatiles by Volume:<1.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES
Hazardous Decomposition Products:CO, CO2.
Conditions to Avoid Polymerization:EXCESSIVE EXOTHERMS WHEN CURED.
Disposal
Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH LOCAL POLLUTION
REGULATIONS AND ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.